VHF Compact Synthesized FM Mobile Transceiver (non-EU use) 

Key Features 

Frequency Range: 136-174 MHz

128 Channels/128 Zones

25 Watts RF Output

Emergency Mode

QT & DQT Signalling plus DTMF PTT ID

Electronic Serial Number

MDC-1200 Signalling

D-Sub 15 pin Interface Connector

Requires Optional Microphone

Supplied With 

D.C. Cable Yes

Fuse Yes, 10 A

Instruction Manual Yes, English & Russian

Mounting Bracket Yes

PMR General Features 

Blue colour LED Yes

3-colour LED (Red, Orange, Green) Yes

2-Tone Signalling Yes

5-Tone Signalling formats Requires special license ID

Busy Channel Lock-out Yes

Calling Alert Yes

Compact Design Yes

Companded Audio Yes

DB-15 Accessory Connector Yes; can also be programmed as 8 individual Accessory Ports

DTMF Function Yes

Ease of Operating Use Yes

Embedded Message Yes

Emergency Call Function Yes

Emergency Key Yes

Enhanced Kenwood Audio Yes

FleetSync Yes

Front-mounted Loudspeaker Yes

GPS Compatible Yes

Horn Alert/PA Function Yes

Independent Setting per Channel Compander, Scrambler, Wide/Narrow Deviation & Hi/Lo Power

Kenwood ESN (Electronic Serial Number) Yes

Key Lock Yes

Lone Worker Function Yes

LTR Trunking Yes

MDC-1200 Yes

Minimum-Volume Setting Yes

Monitor Button Yes

Multiple Scanning Function Yes

Operator Selectable Tone Yes

Programmable Function Keys 10 Programmable Function Keys


QT (CTCSS) / DQT (digital) Yes

Remote Stun and Revive Yes

RSSI Level Indicator Yes

SelCall Function Yes

Selectable Microphone Gain Yes

Switchable Display Backlighting Yes

Talk Around Yes

"Talk Back" Scanning Function Yes

Time-Out Timer Yes

Transceiver Password Yes

Voice Inversion Scrambler Yes

Voting Function Yes

Windows PC Programming and Tuning Yes

Wired Cloning Function Yes

FleetSync Signalling Features 

External-device Switching Yes, External devices can be switched (via the AUX output) on receipt of a status ID code

Paging Call Function Yes

PTT ID Digital ANI Yes

Selective Calling Yes

Short/Long Text Messages Yes

Status Messaging Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

MDC1200 Signalling Features 

Emergency Encode/Decode Yes

PTT ID Encode/Decode Yes

Radio check Decode Yes

Stun/Revive Decode Yes


Internal GPS Board Yes - NMEA 0183 V2 compatible

"Molex" interface Via KCT-60M Cable

Voice Guide & Storage Yes

Applicable Standards 

FCC Yes, Parts 22/74/90/90.210

IP54 Yes

MIL-STD 810 C/D/E/F/G Yes

Technical Specifications 

Frequency Range - M Type 136 - 174 MHz

Number of Channels 128

Number of Zones 128

Channel Frequency Spread 38 MHz

Channel Spacing - Wide/Narrow 25 kHz/12.5 kHz

Antenna Impedance - 50 Ohm Yes

Current Drain Standby: ≤ 0.4 A

Receive: ≤ 1.0 A

Transmit: ≤ 8.0 A

Frequency Stability ± 2.5 ppm (-30 °C to + 60 °C)

Operating Temperature Range -30 °C to + 60 °C

Operating Voltage 13.6 V DC ± 15%

PLL Channel Steps 2.5 kHz/5.0 kHz/6.25 kHz/7.5 kHz

Dimensions 160 x 43 x 136 mm (Projections not included)

Weight (net) 2.0 Kg

Receiver Specifications 

Adjacent Channel Selectivity Wide/Narrow: 75/65 dB

Audio Output 4 W with less than 5% distortion

Intermodulation Wide/Narrow: 70/65 dB

Sensitivity - EIA 12 dB SINAD Wide/Narrow: 0.28/0.35 µV

Spurious & Image Rejection 75 dB

Transmitter Specifications 

RF Power Output (High/Low) 25 W / 5 W

FM Noise (EIA) Wide/Narrow: 45/40 dB

Microphone Impedance 600 Ohm

Modulation Distortion (Wide/Narrow) Less than 3%/5%

Modulation Limiting ± 5.0 kHz at 25 kHz

± 2.5 kHz at 12.5 kHz

Spurious Response (EIA) 70 dB


  • Product Code: TK-7360M
  • Availability: In Stock

Tags: Analogue, Licensed, Mobiles