+373 69 579690
UHF FM Keypad Portable Radio (non-EU use)
Key Features
Frequency Range: 400-470 MHz
128 Channels/128 Zones (250 Channels with special license)
5 Watt RF Output
Internal VOX Function with 10 levels
12-key, programmable, keypad plus 6 other programmable keys for maximum flexibility
Built-In Voice Scrambler
FleetSync plus DTMF, QT and DQT Signalling
MDC-1200 Signalling
2-tone Encode/Decode
Supplied With
Belt Clip Yes, KBH-10M
Instruction Manual Yes, English
Screw Set Yes
PMR General Features
Blue colour LED Yes
3-colour LED (Red, Orange, Green) Yes
2-Tone Signalling Yes
Battery Saver Mode Yes
Battery Status Indicator Yes
Busy Channel Lock-out Yes
Calling Alert Yes
Compact Design Yes
Companded Audio Yes
DTMF Function Yes
Emergency Call Function Yes
Enhanced Kenwood Audio Yes
FleetSync Yes
GPS Compatible Yes
Illuminated Keys Yes
Independent Setting per Channel VOX, Compander, Scrambler & Wide/Narrow Deviation
Kenwood ESN (Electronic Serial Number) Yes
Key Lock Yes
Lone Worker Function Yes
Monitor Button Yes
Multiple Scanning Function Yes
Operator Selectable Tone Yes
Programmable Function Keys 18 Programmable Function Keys
PTT ID Yes
QT (CTCSS) / DQT (digital) Yes
Remote Stun Yes
RSSI Level Indicator Yes
Self-programming Mode Yes
SelCall Function Yes
Selectable Microphone Gain Yes
Short Text Messaging Yes, Receive only, up to 48 characters per message. Up to 3 Short Messages can be stored in the stack memory.
Talk Around Yes
"Talk Back" Scanning Function Yes
Time-Out Timer Yes
Transceiver Password Yes
Voice Inversion Scrambler Yes
VOX Yes. 10-level sensitivity adjustment
Windows PC Programming and Tuning Yes
Wireless Cloning Function Yes
FleetSync Signalling Features
Caller ID Display Yes
Group Calling Yes
Paging Call Function Yes
Pre-programmed Status Messages Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages).
PTT ID Digital ANI Yes
Selective Calling Yes
Short Text Messages Yes
MDC1200 Signalling Features
Call Alert Encode/Decode Yes
Emergency Encode/Decode Yes
PTT ID Encode/Decode Yes
Radio Check Encode/Decode Yes
SelCall Encode/Decode Yes
Stun/Revive Encode/Decode Yes
Options
Choice of Optional Battery Packs Yes
GPS Speaker/Mic Option KMC-48GPS
Applicable Standards
Factory Quality Certification and Location ISO 9001. Manufactured in Singapore
FCC Yes, Parts 22, 74, 90
IP54 Yes
IP55 Yes
Measurement - EIA Standards Yes
MIL-STD 810 C/D/E/F/G Yes
Technical Specifications
Frequency Range - K Type 400 - 470 MHz
Number of Channels 128
Number of Zones 128
Channel Frequency Spread 38 MHz
Channel Spacing Wide: 25 kHz
Narrow: 12.5 kHz
Antenna Impedance - 50 Ohm Yes
Battery Life With KNB-53N: 9 hours
With KNB-45L: 12 hours
- 5-5-90 duty cycle, with battery saver off
Battery Voltage 7.5 V DC ± 20%
Frequency Stability ± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range -30 °C to + 60 °C
PLL Channel Steps 2.5 kHz/5.0 kHz/6.25 kHz/7.5 kHz
Dimensions Radio with KNB-45L: W x H x D - 54 x 122 x 33.7 mm Projections not included
Weight (net) Radio only: 180 g
With KNB-45L: 300 g
Receiver Specifications
Adjacent Channel Selectivity 70dB at 25 kHz
60dB at 12.5 kHz
Audio Output 500 mW with less than 5% distortion
Intermodulation 70dB at 25 kHz
Sensitivity - EIA 12 dB SINAD 0.25 µV at 25 kHz
0.28 µV at 12.5 kHz
Spurious Response Rejection 70 dB
Transmitter Specifications
RF Power Output (High/Low) 5 W / 1 W
FM Noise (EIA) 45 dB at 25 kHz
40 dB at 12.5 kHz
Modulation Distortion Less than 5%
Spurious Response (EIA) 70 dB
Tags: Analogue, Licensed, Handhelds